联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

碳氮稳定同位素比值在潮间带大型底栖动物组织间差异性研究   总被引：1，自引：1，他引：0  

刘博  陈琳琳  李宝泉  侯西勇  冯光海  李晓炜  李秉钧  王玉珏 《海洋学报》2019,41(4):74-82

近年来，稳定同位素技术已被广泛应用于食物网研究中。然而，生物样品取样部位对食物网构建的影响的研究相对少见。大型底栖动物作为潮间带食物网的重要组成部分，在食物网研究中有必要对其采样部位进行统一，以增加研究结果的准确性及可比较性。本研究选取黄河三角洲和烟台潮间带10种代表性的大型底栖动物，比较δ13C和δ15N在不同采样部位中的差异。结果显示，对于大多数底栖动物而言，采样部位将直接影响到δ13C和δ15N的测定结果。当底栖动物作为摄食者，需分析其食性和营养级时，应统一采用肌肉组织，如贝类的闭壳肌或足部肌肉，蟹类的鳌足肌肉，鱼类的背部肌肉；当底栖动物作为被摄食者，需分析次级消费者的食性和营养级时，除多毛类采用去除消化道内容物的体壁外，其他种类应选取整体（难以被消化的组织除外），如贝类的软体部，蟹类肌肉与鳃等的混合组织。  相似文献   

新疆绿洲城镇组群内部经济联系及空间差异测度研究          下载免费PDF全文

李雪梅 《干旱区地理》2019,42(1):180-186

绿洲城镇组群是新疆特殊区域形成的规模相对较小的单一中心空间自组织模式。运用城市中心性指数、城市经济联系模型和Theil系数对新疆八大绿洲城镇组群内部城镇中心性、经济联系及空间差异测度。结果显示：绿洲城镇组群内部的中心城市的中心性职能较强，周边城镇的中心性职能相对较弱，形成了单中心的空间自组织模式；绿洲城镇组群内部经济联系量和经济联系隶属度大小的排序一致，离中心城市的距离越近、经济发展水平越高，经济联系隶属度越高；近10 a年来绿洲城镇组群的整体空间差异一直在扩大，且呈现出继续扩大趋势。在此基础上，提出了建立区域合作协调机制、明确城镇组群发展方向、增强中心城市的辐射带动作用、实现产业合理分工以及构建制度保障体系促进绿洲城镇组群的协同发展。  相似文献   

Responding to Global Warming: Mitigation Policies and Actions of Stakeholders in China’s Tourism Industry     

FENG Ling  CHEN Da  GAO Shan  WANG Yongzhi  TANG Chengcai 《资源与生态学报(英文版)》2019,10(1):94-103

China’s tourism industry has witnessed rapid progress in recent years, and is now an important part of global tourism in dealing with climate change. Within a framework of Pressure-State-Response (PSR), this paper focuses on the emission reduction pressure, carbon emission status, and responses of stakeholders in China’s tourism industry. Findings include: 1) The central government’s strategy and rapid growth of the industry scale exert rising pressure on China’s tourism to reduce carbon emissions. 2) Carbon emissions of China's tourism account for 13%-14.6% of global tourism, and about 3% of China’s emissions overall. Chinese tourists’ per capita carbon emission is lower than half of the global level. 3) The Chinese government attaches great importance to energy-saving and carbon emission reduction. In the tourism industry, documents, standards and other regulative measures have been issued to ensure that business practitioners set up green operational and managerial systems. In the field of tourism transportation, China's high-speed rail, new energy vehicles, and urban shared bicycles, have developed very rapidly in recent years, and they have effectively reduced the carbon emissions in traveling. Furthermore, this paper finds that Chinese tourists already have awareness and willingness for low-carbon tourism.  相似文献   

基于傅里叶级数的中国沿海地区Tm模型精化研究     

刘立龙  万庆同  周威  黄良珂  黎峻宇 《大地测量与地球动力学》2019,39(11):1137-1141

本文采用中国沿海地区13个探空站2010~2014年实测地表温度T_s与平均温度T_m数据，利用傅里叶级数分析法精化中国沿海地区T_m模型，并将2015年探空站实测T_m数据与精化模型进行对比检验。结果表明，精化模型在T_m探测方面具有更高的计算精度，其计算大气可降水量的误差概率分布趋近于正态分布，具有较强的稳定性。  相似文献   

Main active faults and seismic activity along the Yangtze River Economic Belt: Based on remote sensing geological survey     

《China Geology》2020,3(2):314-338

The Yangtze River Economic Belt (YREB) spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and present-day crustal deformation. Active faults and seismic activity are important geological factors for the planning and development of the YREB. In this paper, the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings, using both remote-sensing data and geological survey results. The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed. The main active fault zones in the western YREB, together with the neighboring regional active faults, make up an arc fault block region comprising primarily of Sichuan-Yunnan and a “Sichuan-Yunnan arc rotational-shear active tectonic system” strong deformation region that features rotation, shear and extensional deformation. The active faults in the central-eastern YREB, with seven NE-NNE and seven NW-NWW active faults (the “7-longitudinal, 7-horizontal” pattern), macroscopically make up a “chessboard tectonic system” medium-weak deformation region in the geomechanical tectonic system. They are also the main geological constraints for the crustal stability of the YREB.  相似文献   

捷联式航空重力扰动矢量解算及误差补偿     

郭栋  孙中苗  吴富梅  张琪 《大地测量与地球动力学》2018,38(12):1295-1301

介绍捷联式航空重力矢量测量的基本原理，利用波数相关滤波（WCF）、比力线性校正的方法对重力扰动的水平和垂向分量进行误差补偿，评定内符合精度。对国产捷联式航空重力矢量仪的某次试验数据进行处理，以验证和评估航空重力矢量仪的性能。结果表明，在半波长分辨率为7.5 km时，6条重复测线的重力扰动水平分量经波数相关滤波处理后，东、北向分量的平均内符合精度分别从9.77 mGal、9.18 mGal提高到5.95 mGal、3.83 mGal；对比力的垂向分量线性校正后，将解算的重力扰动垂向分量再用WCF方法处理，其平均内符合精度从1.27 mGal提高到0.59 mGal。  相似文献   

GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究     

孟庆筱  景鹏旭  何申海  党学会 《大地测量与地球动力学》2018,38(12):1227-1231

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件，使用非连续接触有限元技术构建陇西块体二维有限元模型，在摩擦系数不确定性分析基础上，计算区内主要断裂带滑动速率。结果表明，现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍，陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征，滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a，说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。  相似文献   

参数带椭球约束平差算法的应用     

肖兆兵  宋迎春  谢雪梅 《大地测量与地球动力学》2018,38(9):964-967

针对实际工程应用中遇到的参数带有范围约束的情形，提出带椭球约束的平差算法，并给出其具体模型和解算步骤。数值模拟实验和病态测边网数据计算表明，在处理病态问题时，最小二乘平差（least-squares，LS）已不适用，而与岭估计、奇异值分解法（singular value decomposition，SVD）以及不等式约束相比，本文算法精度更高。  相似文献   

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method          下载免费PDF全文

Mozhen Zhou  Bingyin Zhang  Chong Peng 《国际地质力学数值与分析法杂志》2018,42(5):781-805

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.  相似文献